HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

180
Inet6 Address is FE80::54D5:4EFF:FE4D:451C/10 Scope:Link
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address:56D5-4E4D-451C
IPV6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address:56D5-4E4D-451C
Input:513 packets, 0 errors, 0 dropped, 0 overruns, 0 frame
Output:6 packets, 0 errors, 0 dropped, 0 overruns, 0 carrier
0 collisions, 0 txqueuelen
Input bytes:68702
Output bytes:468
Table 24 Command output
Field Descri
p
tion
m-eth0 current state
Physical layer status of the management Ethernet interface:
Administratively DOWN—The interface has been shut down
by using the shutdown command.
DOWN—The interface has been enabled by using the undo
shutdown command but its physical status is down because,
for example, no cable is connected or a line failure
occurred.
UP—The interface has been enabled by using the undo
shutdown command but its physical status is up.
Line protocol current state Link layer status of the interface.
The Maximum Transmit Unit MTU of the interface.
Inet4 Address
IPv4 address of the interface. This field is displayed only when
the device is configured with an IPv4 address.
Inet6 Address
IPv6 global unicast address of the interface. This field is
displayed only when the device is configured with an IPv6
address.
Inet6 Address is
FE80::202:3FF:FE04:506/10 Scope:Link
IPv6 link-local address of the interface.
IP Packet Frame Type:PKTFMT_ETHNT_2,
Hardware Address: c4ca-d94c-e201
Link layer encapsulation type and hardware address for IPv4
packets.
IPV6 Packet Frame Type:PKTFMT_ETHNT_2,
Hardware Address: c4ca-d94c-e201
Link layer encapsulation type and hardware address for IPv6
packets.
Input: 8983 packets, 0 errors, 0 dropped, 0
overruns, 2 frame
Statistics for received packets:
Total number.
Number of erroneous packets.
Number of dropped packets.
Number of packets encountering queue overflow errors.
Number of packets encountering frame queue errors.