HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

181
Field Descri
p
tion
Output: 431 packets, 0 errors, 0 dropped, 0
overruns, 0 carrier, 0 collisions, 1000
txqueuelen
Statistics for sent packets:
• Total number.
• Number of erroneous packets.
• Number of dropped packets.
• Number of packets encountering queue overflow errors.
• Number of packets encountering carrier failures.
• Number of packets with collision.
• Number of packets permitted by the queue.
Input bytes Total number of received bytes.
Output bytes Total number of sent bytes.
display ip routing-table
Use display ip routing-table to display IPv4 routing information.
Syntax
display ip routing-table
Views
Any view
Examples
# Display IPv4 routing information.
<boot> display ip routing-table
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.116.0 * 255.255.255.0 U 0 0 0 m-eth0
default 192.168.116.1 0.0.0.0 UG 0 0 0 m-eth0
Table 25 Command output
Field Descri
p
tion
Kernel IP routing table IPv4 routing information.
Destination Destination address. For the default route, the value of this field is default.
Gateway
Gateway address. If no gateway is needed, the value of this field is an asterisk
(*).
Genmask Subnet mask. For the default route, the value of this field is 0.0.0.0.
Flags
Flags:
• A—The route was learned from a route advertisement.
• C—The route is a cached route used to fast forward packets.
• D—The route is the default route learned through neighbor discovery.
• G—The route is a gateway route.
• H—The route is a host route.
• U—The route can be used.
Metric Cost of the route.