4000 Router Series Fundamentals Command Reference

198

Device management commands

card-mode

Use card-mode to set the operating mode of an interface card.

Syntax

On an MSR2000 or MSR3000:

card-mode slot slot-number mode-name

On an MSR4000:

card-mode slot slot-number subslot subslot-number mode-name

Views

System view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies a subcard by its subslot number. (On an MSR2000 or MSR3000.)

slot slot-number: Specifies a card by its slot number. (On an MSR4000.)

subslot subslot-number: Specifies a subcard by its subslot number.

mode-name: Specifies an operating mode. This argument might take one of the following values,

depending on the interface card type.

• e: Specifies the E mode, including E1 and E3.

• t: Specifies the T mode, including T1 and T3.

• e1: Specifies the E1 mode.

• t1: Specifies the T1 mode.

• e3: Specifies the E3 mode.

• t3: Specifies the T3 mode.

• pos: Specifies the POS mode.

• e-cpos: Specifies the E-CPOS mode.

• oc-3: Specifies the OC-3c/STM-1c mode (155 Mbps).

• oc-12: Specifies the OC-12c/STM-4c mode (622 Mbps).

• ipsec: Specifies the IPsec mode.

• ssl: Specifies the SSL mode.

• atm: Specifies the ATM mode.

• auto: Specifies the auto-negotiation mode.

• efm: Specifies the EFM mode.