HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

200
clock summer-time
Use clock summer-time to configure the device to use daylight saving time during a specific period of
time.
Use undo clock summer-time to cancel the configuration.
Syntax
clock summer-time name start-time start-date end-time end-date add-time
undo clock summer-time
Default
Daylight saving time is disabled.
Views
System view
Pre-defined user roles
network-admin
Parameters
name: Specifies a name for the daylight saving time schedule, a case-sensitive string of 1 to 32
characters.
start-time: Specifies the start time in the format hh:mm:ss. The hh value is in the range of 0 to 23, the mm
value is in the range of 0 to 59, and the ss value is in the range of 0 to 59. The leading zero in a segment
can be omitted. If the seconds segment is 0 (hh:mm:00), you can omit it. If both the minutes and seconds
segments are 0 (hh:00:00), you can omit both of the segments. For example, to specify 08:00:00, you
can enter 8.
start-date: Specifies the start date in one of the following formats:
• MM/DD. The MM value is in the range of 1 to 12, and the value range of DD depends on the
month value.
• month week date, where:
{ month—Takes January, February, March, April, May, June, July, August, September, October,
November or December.
{ week—Represents week of the month. It takes first, second, third, fourth, fifth, or last.
{ day—Takes Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday.
end-time: Specifies the end time in the format hh:mm:ss. The hh value is in the range of 0 to 23, the mm
value is in the range of 0 to 59, and the ss value is in the range of 0 to 59. The leading zero in a segment
can be omitted. If the seconds segment is 0 (hh:mm:00), you can omit it. If both the minutes and seconds
segments are 0 (hh:00:00), you can omit both of the segments. For example, to specify 08:00:00, you
can enter 8.
end-date: Specifies the end date in one of the following formats:
• MM/DD. The MM value is in the range of 1 to 12, and the value range of DD depends on the
month value.
• month week date, where:
{ month—Takes January, February, March, April, May, June, July, August, September, October,
November or December.