4000 Router Series Fundamentals Command Reference

204

****************************************************************************

User interface con0 is available.

Press ENTER to get started.

# Disable displaying the copyright statement.

<Sysname> system-view

[Sysname] undo copyright-info enable

• When a Telnet user logs in, the user view prompt appears:

• When a console user quits user view, the following message appears:

User interface con0 is available.

Press ENTER to get started.

display alarm

Use display alarm to display alarm information.

Syntax

display alarm [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the entire device. The value is always 0. (On an MSR2000 or MSR3000.)

slot slot-number: Specifies a card by its slot number. Without this option, the command displays the

alarm information of all cards. (On an MSR4000.)

Examples

# On an MSR2000 or MSR3000, display alarm information.

<Sysname> display alarm

Slot Level Info

0 ERROR faulty

Table 28 Command output

Field Descri

tion

Slot

If the alarm was generated by a card in a slot, the value of this field is a hyphen (-).

Otherwise, the value of this field is 0.