HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

225
Field Descri
p
tion
Last completion
time
Last time when the schedule was completed. If no execution time is specified, this field is
not displayed.
Execution counts
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Job name Name of a job under the schedule.
Last execution
status
Result of the most recent execution:
• Successful.
• Failed.
• Waiting—The device is executing the schedule and the job is waiting to be executed.
• In process—The job is being executed.
• -NA-—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and the
execution results, execute the display scheduler logfile command.
display transceiver alarm
Use display transceiver alarm to display the alarms present on transceiver modules.
Syntax
display transceiver alarm interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the alarms present on the transceiver modules on all interfaces.
Usage guidelines
Table 39 shows the alarms that might occur to the commonly used transceiver modules.
If no error occurs, "None" is displayed.
Table 39 Alarms on commonly used transceiver modules
Field Remarks
GBIC/SFP:
RX signal loss Received signals are lost.
RX power high The received optical power is high.
RX power low The received optical power is low.
TX fault Transmission error.
TX bias high The transmitted bias current is high.