HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

228
Table 40 Command output
Field Descri
p
tion
transceiver current alarm information Alarms present on the transceiver module.
RX loss of signal Received signals are lost.
RX power low Received power is low.
display transceiver diagnosis
Use display transceiver diagnosis to display the current measured values of the digital diagnosis
parameters for transceiver modules.
Syntax
display transceiver diagnosis interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the current measured values of the digital diagnosis parameters for
the transceiver modules on all interfaces.
Usage guidelines
This command cannot display information for some transceiver modules.
Examples
# Display the current measured values of the digital diagnosis parameters for the transceiver module on
interface GigabitEthernet 2/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 2/2
GigabitEthernet2/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm)
36 3.31 6.13 -35.64 -5.19
Table 41 Command output
Field Descri
p
tion
transceiver diagnostic information Digital diagnosis information of the transceiver module on the interface.
Temp.(°C) Temperature in °C, accurate to 1°C.
Voltage(V) Voltage in V, accurate to 0.01 V.
Bias(mA) Bias current in mA, accurate to 0.01 mA.
RX power(dBm) RX power in dBm, accurate to 0.01 dBm.