HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

229
Field Descri
p
tion
TX power(dBm) TX power in dBm, accurate to 0.01 dBm.
display transceiver interface
Use display transceiver interface to display the key parameters of transceiver modules.
Syntax
display transceiver interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. Without this option, the
command displays the key parameters of the transceiver modules on all interfaces of the device.
Examples
# Display the key parameters of the transceiver module on interface GigabitEthernet 2/3.
<Sysname> display transceiver interface gigabitethernet 2/3
GigabitEthernet2/3 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : HP
Ordering Name : SFP-GE-SX-MM850
Table 42 Command output
Field Descri
p
tion
transceiver information Transceiver module information.
Transceiver Type Transceiver module type.
Connector Type
Connector type options:
• SC—Fiber connector developed by NTT.
• LC—1.25 mm/RJ-45 fiber connector developed by Lucent.
• RJ-45.
• CX 4.
Wavelength(nm)
• Fiber transceiver: Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
• Copper cable: Displayed as N/A.