HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

240
Related commands
display scheduler logfile
restore factory-default
Use restore factory-default to restore the factory-default configuration for the device.
Syntax
restore factory-default
Views
User view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
This command is disruptive.
If a device fails or you want to use it in a different scenario, you can restore the factory-default
configuration for the device.
This command does the following:
• Deletes all configuration files (.cfg files) in the root directories of the storage media.
• Deletes all log files (.log files in the folder /logfile).
• Clears all log information (in the log buffer), trap information, and debugging information.
• Restores the parameters for the BootWare to the factory-default settings.
After this command is executed, only the items required for fundamental device operation are retained,
including the .bin files, the MAC addresses, and the electronic label information.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to factory-default status. Do you want to continue
[Y/N]:y
Now restoring, this maybe take a few minutes, please wait.
.....................................................................................
....................Done.
Success to restore the factory-default configuration. Please reboot the system to take
effect.
Related commands
reboot
save-power delay-timer
Use save-power delay-timer to set the wake-to-sleep delay timer.
Use undo save-power delay-timer to restore the default.