HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

241
Syntax
save-power delay-timer time
undo save-power delay-timer
The following matrix shows the command and router compatibility:
Command MSR2000 MSR3000 MSR4000
save-power delay-timer Yes Yes No
Default
The wake-to-sleep delay time is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time: Specifies the delay time in seconds, in the range of 10 to 100.
Usage guidelines
When the power saving function is enabled, the device operates in sleep mode or wake mode. The
wake-to-sleep delay timer starts when the device transitions to wake mode. If you do not enter characters
on the console terminal or press the Mode button before this timer expires, the device will transition to
sleep mode.
Examples
# Set the wake-to-sleep delay timer for power saving to 30 seconds.
<Sysname> system-view
[Sysname] save-power delay-timer 30
Related commands
• save-power enable
• save-power mode
save-power enable
Use save-power enable to enable the power saving function.
Use undo save-power enable to restore the default.
Syntax
save-power enable
undo save-power enable
The following matrix shows the command and router compatibility:
Command MSR2000 MSR3000 MSR4000
save-power enable Yes Yes No