HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

251
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date 5
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the last day of every month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date last
# Configure the device to execute schedule saveconfig at 8:00 a.m. every Friday and Saturday.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 week-day fri sat
Related commands
scheduler schedule
transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable alarm traps for transceiver modules.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Predefined user roles
network-admin
Usage guidelines
If you install a transceiver module that has no vendor name, the system repeatedly outputs traps and logs
to notify the user to replace the module. To continue to use such a transceiver module that is
manufactured or customized by HP but has no vendor information, you can disable alarm traps so the
system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
usb disable
Use usb disable to disable all USB interfaces.
Use undo usb disable to enable all USB interfaces.
Syntax
usb disable