4000 Router Series Fundamentals Command Reference

Usage guidelines

Feature groups L2 and L3 are predefined feature groups.

Examples

# Display the feature lists of feature groups.

<Sysname> display role feature-group

Feature group: L2

Feature: igmp-snooping (IGMP-Snooping related commands)

Feature: stp (STP related commands)

Feature: lldp (LLDP related commands)

Feature: loopbk-detect (Loopback-detection related commands)

Feature: vlan (Virtual LAN related commands)

Feature: port-security (Port-security related commands)

Feature group: L3

Feature: route (Route management related commands)

Feature: usr (Unicast static route related commands)

Feature: ospf (Open Shortest Path First protocol related commands)

Feature: rip (Routing Information Protocol related commands)

Feature: isis (ISIS protocol related commands)

Feature: bgp (Border Gateway Protocol related commands)

Feature: l3vpn (Layer 3 Virtual Private Network related commands)

Feature: route-policy (Routing Policy related commands)

Feature: multicast (Multicast related commands)

Feature: pim (Protocol Independent Multicast related commands)

Feature: igmp (Internet Group Management Protocol related commands)

Feature: mld (Multicast Listener Discovery related commands)

Feature: mcast-domain (Multicast Domain related commands)

# Display the commands in each feature group. For more information about the wildcards and marks

used in the command list, see Table 2.

<Sysname> display role feature-group verbose

Feature group: L2

Feature: igmp-snooping (IGMP-Snooping related commands)

system-view ; igmp-snooping (W)

system-view ; vlan * ; igmp-snooping * (W)

system-view ; interface * ; igmp-snooping * (W)

display igmp-snooping * (R)

reset igmp-snooping * (W)

debugging igmp-snooping * (W)

display debugging igmp-snooping * (R)

system-view ; probe * ; debugging system internal igmp-snooping * (W)

Feature: stp (STP related commands)

display stp * (R)

system-view ; stp * (W)

system-view ; interface * ; stp * (W)

reset stp * (W)

debugging stp * (W)

display debugging stp * (R)