HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

43
Parameters
role rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must exist
in the system. If no user role is specified, this command sets a password for user role network-admin.
hash: Sets a hashed password.
simple: Sets a plaintext password. This password will be saved in hashed text for security purposes.
password: Specifies the password string. This argument is case sensitive.
• In non-FIPS mode, if simple is specified, it must be a string of 1 to 63 characters. If hash is specified,
it must be a string of 1 to 110 characters.
• In FIPS mode, the password must be a string of 15 to 63 characters, and must contain 4 character
types including digits, uppercase letters, lowercase letters, and special characters.
Usage guidelines
If you do not specify any parameters, you specify a plaintext password in the interactive mode.
The FIPS mode supports only the interactive mode for setting a password.
Set a password if you configure local password authentication for temporary user role authorization.
It is a good practice to specify different passwords for different user roles.
Examples
# Set the password to 123456TESTplat&! for the user role network-operator.
<Sysname> system-view
[Sysname] super password role network-operator simple 123456TESTplat&!
# Set the password to 123456TESTplat&! in the interactive mode for the user role network-operator.
<Sysname> system-view
[Sysname] super password role network-operator
Password:
Confirm :
Updating user information. Please wait... ...
Related commands
super authentication-mode
vlan policy deny
Use vlan policy deny to enter the user role VLAN policy view.
Use undo vlan policy deny to restore the default user role VLAN policy.
Syntax
vlan policy deny
undo vlan policy deny
Default
A user role has no access to any VLAN.
Views
User role view