4000 Router Series Fundamentals Command Reference

+ : Line is active.

F : Line is active and in async mode.

Idx : Absolute index of line.

Type : Type and relative index of line.

Auth : Login authentication mode.

Int : Physical port of the line.

A : Authentication use AAA.

N : No authentication is required.

P : Password authentication.

Table 4 Command output

Field Description

Modem

Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen

(-) is displayed.

# Display summary information about all user lines.

<Sysname> display line summary

Line type : [TTY]

0:XXXX XXXX XXXX XXXX

16:XXXX XXXX XXXX XXXX

32:XXXX XXXX XXXX XXXX

48:XXXX XXXX XXXX XXXX

Line type : [AUX]

64:X

Line type : [VTY]

65:UUUX XXXX XXXX XXXX

81:XXXX XXXX XXXX XXXX

97:XXXX XXXX XXXX XXXX

113:XXXX XXXX XXXX XXXX

3 lines used. (U)

126 lines not used. (X)

Table 5 Command output

Fields Description

number:status

The number indicates the absolute number of the first user line of the user line class,

starting from 0. The status indicates whether the user lines of the user line class are

being used (X for unused and U for used).

For example, if "2:UXXX X" is displayed, there are five user lines of the user line class,

which use the absolute numbers 2 through 6. User line 2 is in use, and the other user

lines are not.

display telnet client

Use display telnet client to display the source IPv4 address or source line configured for the device to use

for outgoing Telnet packets when serving as a Telnet client.