HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

55
Keyword MSR2000 MSR3000 MSR4000
console No No Yes
The following matrix shows the argument and router compatibility:
Argument MSR2000 MSR3000 MSR4000
number1 0 to 128 0 to 240 0 to 499
number2
aux: 0
tty: 1 to 64
vty: 0 to 63
aux: 0
tty: 1 to 176
vty: 0 to 63
aux: 0 to1
console: 0 to 1
tty: 1 to 432
vty: 0 to 63
Usage guidelines
This is an older command reserved for backward compatibility purposes. Although it has the same
functionality and output as the display line command, HP recommends that you use the display line
command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type Tx/Rx Modem Auth Int
0 CON 0 9600 - N -
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 6 Command output
Field Description
Modem
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
(-) is displayed.
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [TTY]
0:XXXX XXXX XXXX XXXX
16:XXXX XXXX XXXX XXXX
32:XXXX XXXX XXXX XXXX
48:XXXX XXXX XXXX XXXX
Line type : [AUX]
64:X