HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

62
This is an older command reserved for backward compatibility purposes. Although it has the same
functionality and output as the free line command, HP recommends you use the free line command.
Examples
# Release user line VTY 1:
1. Display online users.
<Sysname> display users
Idx LINE Idle Time Pid Type
10 VTY 0 00:10:49 Jun 11 11:27:32 320 TEL
+ 11 VTY 1 00:00:00 Jun 11 11:39:40 334 TEL
Following are more details.
VTY 0 :
Location: 192.168.1.12
VTY 1 :
Location: 192.168.1.26
+ : Current operation user.
F : Current operation user works in async mode.
2. If the operations of the user on VTY 1 impact your operations, log out the user.
<Sysname> free user-interface vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]
history-command max-size
Use history-command max-size to set the size of the command history buffer for a user line.
Use undo history-command max-size to restore the default.
Syntax
history-command max-size size-value
undo history-command max-size
Default
The buffer of a user line saves up to 10 history commands.
Views
User line view, user line class view
Predefined user roles
network-admin
Parameters
size-value: Specifies the maximum number of history commands the buffer can store, in the range of 0 to
256.
Usage guidelines
Each user line uses a separate command history buffer to save commands successfully executed by its
user. The size of the buffer determines how many history commands the buffer can store.
To view stored history commands on your user line, press the up arrow key or down arrow key or execute
the display history-command command.