HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

65
[Sysname] line vty 0 63
[Sysname-line-vty0-63]
Related commands
line class
line class
Use line class to enter user line class view.
Syntax
line class { aux | console | tty | vty }
Views
System view
Predefined user roles
network-admin
Parameters
aux: Specifies the AUX line class view.
console: Specifies the console line class view.
tty: Specifies the TTY line class view.
vty: Specifies the VTY line class view.
The following matrix shows the keyword and router compatibility:
Keyword MSR2000 MSR3000 MSR4000
console No No Yes
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
Settings configured in a user line class view are applied as user-defined default settings to all user lines
of the line class. Settings configured in a user line view are applied to only the user line and take
precedence over the user-defined default settings. If a parameter is not configured in user line view or
user line class view, the factory default setting is used.
Settings in a user line view take effect immediately and affect the online user.
Settings in the line class
view
do not affect online users and take effect only for users logged in after the configuration is
completed.
In user line class view, you can execute the following commands:
• activation-key
• auto-execute command
• authentication-mode
• command accounting
• command authorization