HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

72
undo shell
Default
The terminal service is enabled on all user lines.
Views
User line view, user line class view
Predefined user roles
network-admin
Usage guidelines
The undo shell command is not supported in console line view or console line class view.
The undo shell command is not supported in AUX line view or AUX line class view.
You cannot disable the terminal service on the user line you are using.
To configure the device to act as a Telnet or SSH server on a user line, you cannot configure the undo
shell command for the user line.
Examples
# Disable the terminal service for user line VTY 0 through VTY 63 so no user can log in to the device
through the user lines.
<Sysname> system-view
[Sysname] line vty 0 63
[Sysname-line-vty0-63] undo shell
Disable ui-vty0-63 , are you sure? [Y/N]:y
[Sysname-line-vty0-63]
speed
Use speed to set the transmission rate (also called the "baud rate") on a user line.
Use undo speed to restore the default.
Syntax
speed speed-value
undo speed
Default
The transmission rate is 9600 bps.
Views
User line view
Predefined user roles
network-admin
Parameters
speed-value: Transmission rate in bps. The transmission rates available for asynchronous serial interfaces
include: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600
bps, and 115200 bps. The transmission rate varies with devices and configuration environments.