HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

79
Syntax
telnet server ipv6 dscp dscp-value
undo telnet server ipv6 dscp
Default
IPv6 uses the DSCP value 48 for outgoing Telnet packets on a Telnet server.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
The DSCP value is carried in the Traffic class field of an IPv6 packet, and it indicates the transmission
priority of the packet.
This command is not supported in FIPS mode.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server ipv6 dscp 30
telnet server enable
Use telnet server enable to enable the Telnet server function.
Use undo telnet server enable to disable the Telnet server function.
Syntax
telnet server enable
undo telnet server enable
Default
The Telnet server function is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Administrators can Telnet to the device only when the Telnet server function is enabled.
This command is not supported in FIPS mode.
Examples
# Enable the Telnet server function.