HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

82
Related commands
user-interface class
user-interface class
Use user-interface class to enter user line class view.
Syntax
user-interface class { aux | console | tty | vty }
Views
System view
Predefined user roles
network-admin
Parameters
aux: Specifies the AUX line class view.
console: Specifies the console line class view.
tty: Specifies the TTY line class view.
vty: Specifies the VTY line class view.
The following matrix shows the keyword and router compatibility:
Keyword MSR2000 MSR3000 MSR4000
console No No Yes
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
Settings configured in a user line class view are applied as user-defined default settings to all user lines
of the line class. Settings configured in a user line view are applied to only the user line and take
precedence over the user-defined default settings. If a parameter is not configured in user line view or
user line class view, the factory default setting is used.
Settings in a user line view take effect immediately and affect the online user. Settings in the line class
view do not affect online users and take effect only for users who log in after the configuration is
completed.
This is an older command reserved for backward compatibility purposes. Although it has the same
function and output as the line class command, HP recommends you use the line class command.
The following commands are available in user line class view:
• activation-key
• auto-execute command
• authentication-mode
• command accounting
• command authorization