HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

115
IMPORTANT:
To ensure a successful synchronization in a multi-user environment, prevent users from rebootin
g
or
swapping MPUs during the software synchronization process. You can configure the information center to
output the synchronization status to configuration terminals (see
Network Management and Monitoring
Configuration Guide
).
To enable software synchronization from the active MPU to the standby MPU at startup:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable startup software
version check for the
standby MPU.
undo version check ignore
By default, startup software version
check is enabled.
3. Enable software
auto-update for the standby
MPU.
version auto-update enable
By default, software version
auto-update is enabled.
Displaying and maintaining software image
settings
Execute display commands in any view.
Task Command
Display current software images and startup
software images (MSR2000/MSR3000).
display boot-loader
Display current software images and startup
software images (MSR4000).
display boot-loader [ slot slot-number ]
Software upgrade example for
MSR2000/MSR3000
Network requirements
Use the file startup-a2105.ipe to upgrade software images for the device.
Figure 44 Network diagram
TFTP client
TFTP server
Device
2.2.2.2/24
Internet
1.1.1.1/24