4000 Router Series Fundamentals Configuration Guide

138

Schedule configuration example

Network requirements

To save energy, configure the device to enable interfaces Ethernet 1/1 and Ethernet 1/2 at 8:00 a.m.

every Monday through Friday and disable the interfaces at 18:00 every Monday through Friday.

Figure 51 Network diagram

Scheduling procedure

# Enter system view.

<Sysname> system-view

# Configure a job for disabling interface Ethernet 1/1.

[Sysname] scheduler job shutdown-Ethernet1/1

[Sysname-job-shutdown-Ethernet1/1] command 1 system-view

[Sysname-job-shutdown-Ethernet1/1] command 2 interface ethernet 1/1

[Sysname-job-shutdown-Ethernet1/1] command 3 shutdown

[Sysname-job-shutdown-Ethernet1/1] quit

# Configure a job for enabling interface Ethernet 1/1.

[Sysname] scheduler job start-Ethernet1/1

[Sysname-job-start-Ethernet1/1] command 1 system-view

[Sysname-job-start-Ethernet1/1] command 2 interface ethernet 1/1

[Sysname-job-start-Ethernet1/1] command 3 undo shutdown

[Sysname-job-start-Ethernet1/1] quit

# Configure a job for disabling interface Ethernet 1/2.

[Sysname] scheduler job shutdown-Ethernet1/2

[Sysname-job-shutdown-Ethernet1/2] command 1 system-view

[Sysname-job-shutdown-Ethernet1/2] command 2 interface ethernet 1/2

[Sysname-job-shutdown-Ethernet1/2] command 3 shutdown

[Sysname-job-shutdown-Ethernet1/2] quit

# Configure a job for enabling interface Ethernet 1/2.

[Sysname] scheduler job start-Ethernet1/2

[Sysname-job-start-Ethernet1/2] command 1 system-view

[Sysname-job-start-Ethernet1/2] command 2 interface ethernet 1/2