HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

145
Figure 53 Memory alarm notification and alarm-removed notification
To set memory usage thresholds:
Step Command Remarks
1. Enter system
view.
system-view N/A
2. Set memory
usage
thresholds.
• On an MSR2000 or MSR3000:
memory-threshold minor minor-value severe
severe-value critical critical-value normal
normal-value
• On an MSR4000:
memory-threshold [ slot slot-number ] minor
minor-value severe severe-value critical
critical-value normal normal-value
The defaults are as follows:
• Minor alarm threshold—96 MB.
• Severe alarm threshold—64 MB.
• Critical alarm threshold—48 MB.
• Normal state threshold—128
MB.
Disabling all USB interfaces
You can use USB interfaces to upload or download files or to connect a 3G modem. By default, all USB
interfaces are enabled. You can disable USB interfaces as needed.
To disable all USB interfaces:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Disable all USB interfaces.
usb disable
By default, all USB interfaces are
enabled.
Setting the operating mode of an interface card
The device supports the following categories of interface cards:
Minor
Critical
Free memory space
Severe
Normal
Minor alarm-removed
Severe alarm-removed
Time
Minor
alarm
Severe alarm
Critical alarm
Critical alarm-removed