HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

22
Ste
p
Command Remarks
3. Enter user role VLAN policy
view.
vlan policy deny
By default, the VLAN policies of user
roles permit access to all VLANs.
This command disables the access of
the user role to any VLAN.
4. (Optional.) Specify a list of
VLANs accessible to the
user role.
permit vlan vlan-id-list
By default, no accessible VLANs are
configured.
To add more accessible VLANs,
repeat this step.
Changing the VPN instance policy of a user role
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter user role view.
role name role-name N/A
3. Enter user role VPN
instance policy view.
vpn-instance policy deny
By default, the VPN policies of user
roles permit access to all VPNs.
This command disables the access of
the user role to any VPN.
4. (Optional.) Specify a list of
VPNs accessible to the user
role.
permit vpn-instance
vpn-instance-name&<1-10>
By default, no accessible VPNs are
configured.
To add more accessible VPNs, repeat
this step.
Assigning user roles
To control user access to the system, you must assign at least one user role. Make sure at least one user
role among the user roles assigned by the server exists on the device. User role assignment procedure
varies with remote AAA authentication users, local AAA authentication users, and non-AAA
authentication users (see "Assigning user roles")
. For more information about AAA authentication, see
Security Configuration Guide.
Enabling the default user role function
An AAA authentication user must have at least one user role to log in to the device. The default user role
function assigns the network-operator user role to a local or remote AAA authenticated user if the AAA
server has not authorized the user to use any user roles. Without the function, AAA authenticated users
cannot access the system if they have no user role authorization.
You can configure the default user role function to enable an AAA authenticated user that has not been
assigned any user role to log in with the default user role network-operator.
To enable the default user role function for AAA authentication users: