HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

34
Press CTRL+K to abort
Connected to 192.168.1.59 ...
******************************************************************************
* Copyright (c) 2004-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
login: test@bbb
Password:
<Router>?
User view commands:
ping Ping function
quit Exit from current command view
ssh2 Establish a secure shell client connection
super Switch to a user role
system-view Enter the System View
telnet Establish a telnet connection
tracert Tracert function
<router>
2. Obtain the level-3 user role:
# Use the super password to obtain the level-3 user role. When the system prompts for a username
and password, enter the username test@bbb and password enabpass.
<Router> super level-3
Username: test@bbb
Password:
The following output shows that you have obtained the level-3 user role.
User privilege role is level-3, and only those commands that authorized to the role
can be used.
# If the ACS server does not respond, enter the local authentication password 654321 at the
prompt.
Invalid configuration or no response from the authentication server.
Change authentication mode to local.
Password:
User privilege role is level-3, and only those commands that authorized to the role
can be used.
The output shows that you have obtained the level-3 user role.
Troubleshooting RBAC
This section describes several typical RBAC problems and their solutions.