HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

50
Ste
p
Command Remarks
13. Set the session idle
timeout.
idle-timeout minutes [ seconds ]
The default is 10 minutes.
If there is no interaction between the device
and the user within the idle timeout, the
system automatically terminates the user
connection on the user line.
If you set the idle timeout to 0, the session
will not be aged out.
14. Specify a
command to be
automatically
executed when a
user logs in
through the lines.
auto-execute command command
By default, no command is specified for a
user line to be automatically executed.
The device will automatically execute the
specified command when a user logs in
through the user line, and close the user
connection after the command is executed.
This command is not available in console
line view or console line class view.
On a device that has one AUX line and
does not have a console line, this
command is not available in AUX line view
or AUX line class view.
15. Disable the
terminal service.
undo shell
Be default, the terminal service is enabled
on all user lines.
This command is not available in console
line view or console line class view.
On a device that has one AUX line and
does not have a console line, this
command is not available in AUX line view
or AUX line class view.
Logging in through Telnet
You can Telnet to the device to remotely manage the device, or use the device as a Telnet client to Telnet
to other devices to manage them.
By default, Telnet login is disabled on the device. To log in to the device through Telnet, you must first log
in to the device through any other method, enable the Telnet server, and configure Telnet login
authentication on the device.
In FIPS mode, the device does not support Telnet.
Configuring Telnet login on the device
Task Remarks
(Required.) Configuring login authentication:
• Disabling authentication for Telnet login
• Configuring password authentication for Telnet login
• Configuring scheme authentication for Telnet login
Configure one authentication mode as
required.