HP MSR2000/3000/4000 Router Series Fundamentals Configuration Guide

80
Ste
p
Command Remarks
4. Log in to the FTP server.
• (Method 1) Log in to the FTP server
directly in user view:
ftp [ server-address [ service-port ]
[ vpn-instance vpn-instance-name ]
[ dscp dscp-value | source { interface
interface-type interface-number | ip
source-ip-address } ] ] *
• (Method 2) Log in to the FTP server in
FTP client view:
a. ftp
b. open server-address
[ service-port ]
Use either method.
The source IP address
specified in the ftp command
takes precedence over the
one set by the ftp client source
command.
To establish an IPv6 FTP connection:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. (Optional.) Specify the source
IPv6 address for FTP packets
sent by the FTP client.
ftp client ipv6 source { interface
interface-type interface-number |
ipv6 source-ipv6-address }
By default, no source IPv6 address
is specified. The source address is
automatically selected as defined
in RFC 3484.
3. Return to user view.
quit N/A
4. Log in to the FTP server.
• Log in to the FTP server directly
in user view:
ftp ipv6 [ server-address
[ service-port ] [ vpn-instance
vpn-instance-name ] [ dscp
dscp-value | source { ipv6
source-ipv6-address | interface
interface-type
interface-number } ] * [ -i
interface-type
interface-number ]
• Log in to the FTP server in FTP
client view:
a. ftp ipv6
b. open server-address
[ service-port ]
Use either method.
The source IP address specified in
the ftp ipv6 command takes
precedence over the one set by the
ftp client ipv6 source command.