4000 Router Series Fundamentals Configuration Guide

200 TYPE is now ASCII

ftp> put startup.cfg back-startup.cfg

local: startup.cfg remote: back-startup.cfg

150 Connecting to port 47461

226 File successfully transferred

3494 bytes sent in 5.646 seconds (618.00 kbyte/s)

ftp> bye

221-Goodbye. You uploaded 2 and downloaded 2 kbytes.

221 Logout.

FTP client configuration example for MSR4000

Network requirements

• Use the device as the FTP client and the PC as the FTP server.

• Log in to the FTP server from the FTP client using the user account with username abc and password

123 456 (which has been created on the PC).

• Download the file temp.bin from the PC to the device, and upload the configuration file startup.cfg

from the device to the PC for backup.

Figure 40 Network diagram

Configuration procedure

# Configure IP addresses as shown in Figure 40 and make sure the device and PC can reach each other.

(Details not shown.)

# Examine the storage space of the device. If the free space is insufficient, use the delete/unreserved

file-url command to delete unused files. (Details not shown.)

# L o g i n t o t h e F T P s e r v e r a t 10 .1.1.1 u s i n g t h e u s e r n a m e abc and password 123456 .

<Sysname> ftp 10.1.1.1

Connected to 10.1.1.1 (10.1.1.1).

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User (10.1.1.1:(none)): abc

331 Give me your password, please

Password:

230 Logged in successfully

Remote system type is MSDOS.

ftp>

# Set the file transfer mode to binary.

ftp> binary

200 TYPE is now 8-bit binary