HP MSR2000/3000/4000 Router Series High Availability Command Reference

40
Use undo vrrp ipv6 vrid track to remove the association between an IPv6 VRRP group and a track entry.
If no track entry is specified, the association between the VRRP group and any track entry is removed.
Syntax
vrrp ipv6 vrid virtual-router-id track track-entry-number [ reduced priority-reduced | switchover ]
undo vrrp ipv6 vrid virtual-router-id track [ track-entry-number ]
Default
An IPv6 VRRP group is not associated with any track entry.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv6 VRRP group number in the range of 1 to 255.
track-entry-number: Specifies a track entry. The track-entry-number argument is in the range of 1 to 1024.
reduced priority-reduced: Reduces the priority of the router in the VRRP group by a specific value when
the state of the specified track entry changes to negative. The priority-reduced argument is in the range
of 1 to 255.
switchover: Enables the router in backup state to take over as the master immediately after the specified
track entry changes to the negative state.
Usage guidelines
When the associated track entry changes to the negative state, the priority of the router in the VRRP group
decreases by a specified value, or the router immediately takes over as the master if it is a backup,
depending on your configuration.
If neither reduced priority-reduced nor switchover is specified, the priority of the router in the VRRP group
decreases by 10 when the track entry changes to negative.
When the track entry changes from Negative to Positive or NotReady, the router automatically restores its
priority.
IMPORTANT:
• The vrrp ipv6 vrid track command cannot take effect on an IP address owner. If you have confi
g
ured the
command on an IP address owner, the confi
g
uration takes effect after the router chan
g
es to be a non IP
address owner.
• You can create a track entry with the track command before or after you associate it with an IPv6 VRRP
group. For more information about configuring track entries, see
High Availability Configuration Guide .
Examples
# Associate IPv6 VRRP group 1 on Ethernet 1/1 with track entry 1 and decrease the priority of the router
in the VRRP group by 50 when the state of track entry 1 changes to negative.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] vrrp ipv6 vrid 1 track 1 reduced 50