4000 Router Series High Availability Command Reference

VRRP commands

IPv4 VRRP commands

display vrrp

Use display vrrp to display the states of IPv4 VRRP groups.

Syntax

display vrrp [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number.

vrid virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.

verbose: Displays detailed IPv4 VRRP group information. If the verbose keyword is not specified, this

command displays brief IPv4 VRRP group information.

Usage guidelines

If no interface or VRRP group is specified, this command displays the states of all IPv4 VRRP groups. If

only an interface is specified, this command displays the states of all IPv4 VRRP groups on the specified

interface. If both an interface and an IPv4 VRRP group are specified, this command displays the states of

the specified IPv4 VRRP group on the specified interface.

Examples

# Display brief information about all IPv4 VRRP groups on the device when VRRP operates in standard

mode.

<Sysname> display vrrp

IPv4 Virtual Router Information:

Running Mode : Standard

Total number of virtual routers : 1

Interface VRID State Running Adver Auth Virtual

Pri Timer Type IP

---------------------------------------------------------------------

Eth1/1 1 Master 150 100 Simple 1.1.1.1