HP MSR2000/3000/4000 Router Series High Availability Command Reference

66
[Sysname-program-bgp] affinity location-set slot 3 attract 500
affinity location-type
Use affinity location-type to set the affinity of a process to a location type.
Use undo affinity location-type to restore the default.
Syntax
affinity location-type { current | paired | primary } { attract strength | default | none | repulse strength }
undo affinity location-type { current | paired | primary }
Default
No location type affinity is configured for any process.
Views
Placement process view
Predefined user roles
network-admin
Parameters
current: Specifies the affinity to the current location. You can use the display placement program
command to view the current location of a process.
paired: Specifies the affinity to the location of a standby process.
primary: Specifies the affinity to the active MPU. (MSR4000)
attract strength: Sets a positive affinity in the range of 1 to 100000. The higher the value, the stronger
the preference of the process to run on the specified location type.
default: Sets the affinity to the default, a positive affinity of 200.
none: Sets the affinity to 0.
repulse strength: Sets a negative affinity in the range of 1 to 100000. The higher the value, the weaker
the preference for the process to run on the specified location type.
Examples
# Specify a positive affinity of 500 to the current location for BGP.
<Sysname> system-view
[Sysname] placement program bgp
[Sysname-program-bgp] affinity location-type current attract 500
Related commands
• affinity location-set
• affinity program
affinity program
Use affinity program to set the affinity of one process to another process.
Use undo affinity program to remove the configuration.