4000 Router Series High Availability Command Reference

Views

System view

Predefined user roles

network-admin

Usage guidelines

After you issue this command, the system bases its placement decisions on the new process placement

policies, hardware resources, and locations and states of active processes. If the new location for an

active process is different from its current location, the system changes its state to standby and the state

of the standby process on the new location to active. This active/standby switchover does not interrupt

running services because no process is restarted.

Examples

# Reoptimize process placement.

<Sysname> system-view

[Sysname] placement reoptimize

Predicted changes to the placement

Program Current location New location

---------------------------------------------------------------------

syslog 0/0 0/0

l3vpn 0/0 0/0

aaa 0/0 0/0

lauth 0/0 0/0

lsm 0/0 0/0

ip6addr 0/0 0/0

ip6base 0/0 0/0

rm 0/0 0/0

ipcfg 0/0 0/0

acl 0/0 0/0

tunnel 0/0 0/0

lagg 0/0 0/0

qos 0/0 0/0

ipcim 0/0 0/0

ipbase 0/0 0/0

eth 0/0 0/0

ipen 0/0 0/0

Continue? [y/n]:y

Re-optimization of the placement start. You will be notified on completion

Re-optimization of the placement complete. Use 'display placement' to view the new

placement