HP MSR2000/3000/4000 Router Series High Availability Configuration Guide

87
Tasks at a
g
lance
• (Optional.) Configuring a process affinity
• (Optional.) Configuring a self affinity
(Required.) Optimizing process placement
Configuring process placement policy
Configuring a location affinity
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter placement process
view.
• Enter default placement process view:
placement program default
• Enter placement process view:
placement program { program-name
[ instance instance-name ]
Use either command.
Settings in default
placement process view
take effect for all
processes. Settings in
placement process view
take effect for the specified
process only.
3. Set the location affinity.
affinity location-set { slot slot-number [ cpu
cpu-number ] } &<1-5> { attract strength |
default | none | repulse strength }
By default, no location
affinity is set.
Configuring a location type affinity
The following location types are available:
• current—Current location of the active process, which can be displayed with the display placement
program command.
• paired—Locations of standby processes.
• primary—Active MPU. (MSR4000)
To configure a location type affinity:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter placement process view.
• Enter default placement
process view:
placement program default
• Enter placement process view:
placement program
{ program-name [ instance
instance-name ]
Use either command.
Settings in default placement
process view take effect for all
processes. Settings in placement
process view take effect for the
specified process only.