Manualshelf

HP MSR2000/3000/4000 Router Series Interface Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router
919293949596979899100
93
Default
No PRI set is created.
Views
CE1/PRI interface view
Predefined user roles
network-admin
Parameters
timeslot-list list: Specifies the timeslots to be bundled. The list argument can contain multiple timeslot
numbers, each of which is in the range of 1 to 31. You can specify a single timeslot by specifying a
timeslot number, a range of timeslots by providing this argument in the form of { number1-number2 }, or
multiple timeslots by providing this argument in the form of { number1, number2-number3 }.
Usage guidelines
On a CE1/PRI interface in PRI mode, timeslot 0 is used for frame synchronization control (FSC), timeslot
16 as the D channel for signaling transmission, and other timeslots as B channels for data transmission.
You can create only one PRI set on a CE1/PRI interface. This PRI set can include any timeslots except
timeslot 0, and must include timeslot 16. Timeslot 16 cannot form a bundle that includes itself only. The
attempt to bundle only timeslot 16 will fail.
If no timeslot is specified in this command, all timeslots except timeslot 0 are bundled into an interface in
the form of 30B + D.
Upon creation of the PRI set, the system creates a serial interface that is logically equivalent to an ISDN
PRI interface. The serial interface is named in the form of serial number:15 , where number represents the
number of the CE1/PRI interface where the serial interface is created.
Because a channel set and a PRI set cannot coexist on a CE1/PRI interface, your PRI set creation attempt
will fail if the channel-set command is configured.
Examples
# Bundle timeslots 1, 2, and 8 through 12 into a PRI set on CE1/PRI interface E1 2/0.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] pri-set timeslot-list 1,2,8-12
Related commands
channel-set
reset counters controller e1
Use reset counters controller e1 to clear the controller counter for a CE1/PRI interface.
Syntax
reset counters controller e1 [ interface-number ]
Views
User view
Predefined user roles
network-admin