HP MSR2000/3000/4000 Router Series Interface Command Reference

95
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] using e1
Basic CT1/PRI interface configuration commands
alarm-detect
Use alarm-detect to enable RAI detection on the interface.
Use undo alarm-detect to disable RAI detection on the interface.
Syntax
alarm-detect rai
undo alarm-detect rai
Default
RAI detection is enabled on an interface.
Views
CT1/PRI interface view
Predefined user roles
network-admin
Parameters
rai: Remote Alarm Indication (RAI).
Usage guidelines
This command is applicable when the framing format used on the interface is ESF.
Examples
# Disable RAI detection on CT1/PR1 interface T1 2/0.
<Sysname> system-view
[Sysname] controller t1 2/0
[Sysname-T1 2/0] undo alarm detect rai
alarm-threshold
Use alarm-threshold to set LOS, AIS, or LFA alarm thresholds on the CT1/PRI interface.
Use undo alarm-threshold to restore the default.
Syntax
alarm-threshold { ais { level-1 | level-2 } | lfa { level-1 | level-2 | level-3 | level-4 } | los
{ pulse-detection | pulse-recovery } value }
undo alarm-threshold { ais | lfa | los { pulse-detection | pulse-recovery } }
Default
For AIS and LFA, the alarm threshold is level-1.