HP MSR2000/3000/4000 Router Series Interface Command Reference

114
Last clearing of counters: Never
Data in current interval (19349 seconds elapsed):
Loss Frame Alignment: 129 seconds, Framing Error: 0 seconds
CRC Error: 0 seconds, Alarm Indication: 0 seconds
Loss-of-signals: 129 seconds, Code Violations: 0 seconds
Slip: 0 seconds, E-Bit Error: 0 seconds
Table 16 Command output
Field Descri
p
tion
Cable type
Cable type of the interface (75-ohm unbalanced/120-ohm
balanced).
Frame-format Framing format: CRC4 or no-CRC4.
Line Code Line code format: AMI or HDB3.
Source Clock Source clock: master for internal clock and slave for line clock.
Idle code Idle code: 7e or ff.
Itf type Interframe filling tag: 7e or ff.
Itf number Number of Interframe filling tags.
Loopback Whether loopback is configured on the interface.
Alarm State Alarm status.
Last clearing of counters Last time when the interface statistics is cleared.
Data in current interval (19349
seconds elapsed):
Loss Frame Alignment: 129
seconds, Framing Error: 0 seconds
CRC Error: 0 seconds, Alarm
Indication: 0 seconds
Loss-of-signals: 129 seconds,
Code Violations: 0 seconds
Slip: 0 seconds, E-Bit Error: 0
seconds
Time duration that each error lasts within the interval. The errors
include frame misalignment, frame errors, alarms, loss of signals,
code violation, and frame slipping.
fe1 alarm-detect
Use fe1 alarm-detect to enable RAI detection on the interface.
Use undo fe1 alarm-detect to disable RAI detection on the interface.
Syntax
fe1 alarm-detect rai
undo fe1 alarm-detect rai
Default
RAI detection is enabled on an E1-F interface.
Views
E1-F interface view