HP MSR2000/3000/4000 Router Series Interface Command Reference

128
Field Descri
p
tion
Data in current interval (285 seconds elapsed):
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 286 seconds
Slip: 7 seconds, Fr Loss: 286 seconds
Line Err: 0 seconds, Degraded: 0 minitues
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 286 seconds
Statistics spanning the current interval. The statistical
items, such as AIS alarm, LOS signal, and LFA, are
provided according to the T1 specifications for the
physical layer.
For more information, see ANSI T1.403 and AT&T TR
54016.
Data in Interval 1:
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 901 seconds
Slip: 22 seconds, Fr Loss: 901 seconds
Line Err: 0 seconds, Degraded: 0 minitues
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 901 seconds
Statistics spanning the first interval.
The statistical items are the same as those provided by
the statistics spanning the current interval.
Data in Interval 2:
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 900 seconds
Slip: 23 seconds, Fr Loss: 900 seconds
Line Err: 0 seconds, Degraded: 0 minitues
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 900 seconds
Statistics spanning the second interval.
The statistical items are the same as those provided by
the statistics spanning the current interval.
Total Data (last 2 15 minute intervals):
Line Code Violations: 0, Path Code Violations: 0
Ais Alarm: 0 seconds, Los Alarm: 2087 seconds
Slip: 52 seconds, Fr Loss: 2087 seconds
Line Err: 0 seconds, Degraded: 0 minitues
Errored: 0 seconds, Bursty Err: 0 seconds
Severely Err: 0 seconds, Unavail: 2087 seconds
Statistics spanning the last two intervals.
The statistical items are the same as those provided by
the statistics spanning the current interval.
ft1 alarm-detect
Use ft1 alarm-detec to enable RAI detection on the interface.
Use undo ft1 alarm-detect to disable RAI detection on the interface.
Syntax
ft1 alarm-detect rai
undo ft1 alarm-detect rai
Default
RAI detection is enabled on an interface.