HP MSR2000/3000/4000 Router Series Interface Command Reference

143
Examples
# Use the internal clock as the clock source on CE3 interface E3 2/0.
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0] clock master
controller e3
Use controller e3 to enter CE3 interface view.
Syntax
controller e3 interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a CE3 interface by its number.
Examples
# Enter the view of interface E3 2/0.
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0]
display controller e3
Use display controller e3 to display information about CE3 interfaces.
Syntax
display controller e3 [ interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a CE3 interface by its number. If you do not specify this argument, the
command displays information about all CE3 interfaces.
Usage guidelines
This command also displays information about each E1 line on the CE3 interface if the interface is
operating in CE3 mode.