HP MSR2000/3000/4000 Router Series Interface Command Reference

145
E3 2/0 CE1 9: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 10: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 11: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 12: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 13: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 14: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 15: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
E3 2/0 CE1 16: up
Frame-format: NO-CRC4, clock: slave, loopback: not set
Receiver alarm state: none
BERT state: (stopped, not completed)
Table 18 Command output
Field Descri
p
tion
E3 2/0
Current state
Physical state of the interface: up or down.
Description Description about the E3 interface.
Frame-format
Frame format configured on the E3 interface: CRC4 or
NO CRC4.
Line Code Line code: AMI or B8ZS.
clock
Source clock used by the interface: master for the
internal clock or slave for the line clock.
National-bit International bit.
Current mode Operating mode of the E3 interface: E3 or CE3.
Loopback Loopback setting on the interface.