4000 Router Series Interface Command Reference

Overflow: More than 14 digits (7 digits for column "Err").

--: Not supported.

Table 1 Command output

Field Description

Interface Abbreviated interface name.

Total (pkts) Total number of packets received or sent through the interface.

Broadcast (pkts) Total number of broadcast packets received or sent through the interface.

Multicast (pkts) Total number of multicast packets received or sent through the interface.

Err (pkts) Total number of error packets received or sent through the interface.

Overflow: More than 14

digits (7 digits for column

"Err")

The command displays Overflow if any of the following cases applies:

• The data length of an Err field value is greater than 7 decimal digits.

• The data length of a non-Err field value is greater than 14 decimal digits.

--: Not supported The statistical item is not supported.

Related commands

• flow-interval

• reset counters interface

display counters rate

NOTE:

GE interfaces do not support this command.

Use display counters rate to display traffic rate statistics of interfaces in up state over the last statistics

polling interval.

Syntax

display counters rate { inbound | outbound } interface [ interface-type [ interface-number |

interface-number.subnumber ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

inbound: Displays inbound traffic rate statistics.

outbound: Displays outbound traffic rate statistics.

interface-type: Specifies an interface type.

interface-number: Specifies an interface number.