HP MSR2000/3000/4000 Router Series Interface Command Reference

154
Syntax
national-bit { 0 | 1 }
undo national-bit
Default
The national bit on the CE3 interface is 1.
Views
CE3 interface view
Predefined user roles
network-admin
Parameters
0: Sets the national bit to 0 for national communication.
1: Sets the national bit to 1 for international communication.
Usage guidelines
You need to set the national bit to 0 on an E3 interface only in some special circumstances.
Examples
# Set the national bit to 0 on interface E3 2/0.
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0] national-bit 0
reset counters controller e3
Use reset counters controller e3 to clear the controller counter of a CE3 interface.
Syntax
reset counters controller e3 interface-number
Views
User view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a CE3 interface by its number. If you do not specify this argument, the
command clears the counters of all CE3 interfaces.
Usage guidelines
The reset counters interface command clears the counters of all interfaces. To clear the controller counter
of individual CE3 interfaces, use the reset counters controller e3 command.
Examples
# Clear the controller counter of the CE3 interface E3 2/0.
<Sysname> reset counters controller e3 2/0