HP MSR2000/3000/4000 Router Series Interface Command Reference

156
POS interface commands
The following matrix shows the POS interface commands and router compatibility:
Commands MSR2000 MSR3000 MSR4000
POS interface commands No Yes Yes
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
POS interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of interface POS 5/1 to 50 kbps.
<Sysname> system-view
[Sysname] interface pos 5/1
[Sysname-Pos5/1] bandwidth 50
clock
Use clock to set the clock mode of the POS interface.
Use undo clock to restore the default.
Syntax
clock { master | slave }