4000 Router Series Interface Command Reference

interface-number.subnumber: Specifies a subinterface number, where interface-number is an interface

number, and subnumber is the number of a subinterface created under the interface. The value range for

the subnumber argument is 1 to 4094.

Usage guidelines

The statistics cover only interfaces in up state.

If an interface type is specified, the command displays traffic rate statistics for all up interfaces of the

specified type over the last statistics polling interval.

If no interface type is specified, the command displays traffic rate statistics for all up interfaces that have

traffic counters over the last statistics polling interval.

If an interface which is always down over the last statistics polling interval is specified, the system prompts

that the interface does not support the command.

Use the flow-interval command to set the statistics polling interval.

Examples

# Display the inbound traffic rate statistics for all Ethernet interfaces.

<Sysname> display counters rate inbound interface ethernet

Interface Total (pps) Broadcast (pps) Multicast (pps)

Eth2/0 0 -- --

Eth2/2 0 -- --

Eth2/3 0 -- --

Eth4/0 0 -- --

Eth4/1 0 -- --

Eth4/2 0 -- --

Eth4/5 4223 -- --

Eth4/6 0 -- --

Eth4/7 0 -- --

Eth4/8 0 -- --

Overflow: More than 14 digits.

--: Not supported.

Table 2 Command output

Field Description

Interface Abbreviated interface name.

Total (pkts/sec)

Average rate (in pps) of receiving or sending packets during the statistics

polling interval.

Broadcast (pkts/sec)

Average rate (in pps) of receiving or sending broadcast packets during the

statistics polling interval.

Multicast (pkts/sec)

Average rate (in pps) of receiving or sending multicast packets during the

statistics polling interval.

Overflow: more than 14

decimal digits

The command displays Overflow if the data length of a statistical item is

greater than 14 decimal digits.

--: not supported The statistical item is not supported.