HP MSR2000/3000/4000 Router Series Interface Command Reference

163
Field Descri
p
tion
Main IP Main IP address of the interface.
Description
Description of the interface configured by using the
description command. If the description keyword is
not specified in the display interface brief command,
the Description field displays at most 27 characters. If
the description keyword is specified in the display
interface brief command, the field displays the full
interface description.
Cause
Causes for the physical state of an interface to be
DOWN.
• Administratively—The port is manually shut down
with the shutdown command. To restore the
physical state of the interface, use the undo
shutdown command.
• Not connected—No physical connection exists
because the network cable is disconnected or
faulty.
Related commands
reset counters interface
flag
Use flag to set the SONET/SDH overhead bytes.
Use undo flag to restore the default SONET/SDH overhead bytes.
Syntax
flag c2 flag-value
undo flag c2
flag { j0 | j1 } { sdh | sonet } flag-value
undo flag { j0 | j1 } { sdh | sonet }
Default
The default SDH overhead bytes are used.
The default overhead bytes are as follows:
• c2—0x16
• j0 (SDH)—Null
• j1 (SDH)—Null
• j0 (SONET)—0x01
• j1 (SONET)—Null
Views
POS interface view
Predefined user roles
network-admin