HP MSR2000/3000/4000 Router Series Interface Command Reference

168
Syntax
reset counters interface [ pos [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
pos: Clears statistics of POS interfaces.
interface-number: Specifies a POS interface by its number.
Usage guidelines
Before collecting statistics for an interface within a specific period, you need to clear the existing statistics
of the interface.
• If you do not specify pos, this command clears the statistics of all interfaces.
• If you specify pos but not interface-number, this command clears the statistics of all POS interfaces.
• If you specify both pos and interface-number, this command clears the statistics of the specified
POS interface.
Examples
# Clear the statistics of interface POS 5/1.
<Sysname> reset counters interface pos 5/1
Related commands
display interface pos
scramble
Use scramble to enable payload scrambling on the POS interface.
Use undo scramble to disable payload scrambling.
Syntax
scramble
undo scramble
Default
Payload scrambling is enabled on a POS interface.
Views
POS interface view
Predefined user roles
network-admin
Usage guidelines
You can configure payload scrambling to prevent the presence of too many consecutive 1s or 0s, to
facilitate line clock signal extraction at the receiving end.
To connect POS interfaces, enable or disable payload scrambling on both ends.