HP MSR2000/3000/4000 Router Series Interface Command Reference

173
[Sysname-LoopBack1] description for RouterID
display interface inloopback
Use display interface inloopback to display information about the inloopback interface.
Syntax
display interface [ inloopback [ 0 ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
0: Specifies interface Inloopback 0.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions. The description of an inloopback interface
is always InLoopBack0 Interface and cannot be configured.
Usage guidelines
If the inloopback keyword is not specified, the command displays information about all interfaces of the
device.
If the inloopback keyword is specified but the 0 keyword is not specified, the command displays
information about interface Inloopback 0, because the device has only one inloopback interface
Inloopback 0.
Examples
# Display detailed information about interface Inloopback 0.
<Sysname> display interface inloopback 0
InLoopBack0
Current state: UP
Line protocol state: UP (spoofing)
Description: InLoopBack0 Interface
Bandwidth: 0kbps
Maximum Transmit Unit: 1536
Internet protocol processing: disabled
Physical: InLoopBack
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops