HP MSR2000/3000/4000 Router Series Interface Command Reference

24
Field Description
Speed or Duplex: (a)/A - auto; H -
half; F – full
If the speed of an interface is automatically negotiated, its speed attribute
includes the autonegotiation flag, indicated by the letter a in
parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex
mode attribute includes the following options:
• (a)/A—Autonegotiation.
• H—Half negotiation.
• F—Full negotiation.
Type: A - access; T - trunk; H –
hybrid
Link type options for Ethernet interfaces.
Speed Interface rate, in bps.
Duplex
Duplex mode of the interface:
• A—Autonegotiation.
• F—Full duplex.
• F(a)—Autonegotiated full duplex.
• H—Half duplex.
• H(a)—Autonegotiated half duplex.
Type
Link type of the interface:
• A—Access.
• H—Hybrid.
• T—Trunk.
PVID Port VLAN ID.
Cause
Cause for the physical link state of an interface to be DOWN:
• Administratively—The port is manually shut down with the shutdown
command. To restore the physical state of the interface, use the undo
shutdown command.
• DOWN (Link-Aggregation interface down)—When an aggregate
interface is shut down, the physical state of all member ports of the
aggregate interface become DOWN, and the Cause field displays
DOWN (Link-Aggregation interface down).
• DOWN (Loopback detection down)—The port is shut down because
the loopback detection module has detected loops.
• DOWN (Monitor-Link uplink down)—The port is shut down because
the monitor link module has detected that the uplink is down.
• Not connected—No physical connection exists (possibly because the
network cable is disconnected or faulty).
• STP DOWN—The port is shut down by the STP BPDU guard function.
• Port Security Disabled—The port is shut down by the intrusion
detection mechanism because the port receives illegal packets.
• Standby—The interface is in the Standby state.
Related commands
reset counters interface