HP MSR2000/3000/4000 Router Series Interface Command Reference

41
WAN interface configuration commands
Common WAN interface configuration commands
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Serial interface view, serial sub interface view, AM interface view, ,ISDN BRI interface view, E1-F
interface view, T1-F interface view, CE1/PRI interface view, CT1/PRI interface view, MP interface view,
VT interface view, CE3 interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the following items:
• Bandwidth assignment with CBQ. For more information, see ACL and QoS Configuration Guide.
• Link costs in OSPF, OSPFv3, and IS-IS. For more information, see Layer 3—IP Routing Configuration
Guide.
Examples
# Set the expected bandwidth of Serial 2/0 to 50 kbps.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] bandwidth 50
default
Use default to restore the default settings for the interface.
Syntax
default