HP MSR2000/3000/4000 Router Series Interface Command Reference

60
Predefined user roles
network-admin
Parameters
interface-number: Specifies a serial interface by its number.
Examples
# Enter view of asynchronous serial interface Async 6/4/0.
<Sysname> system-view
[Sysname] interface async 6/4/0
[Sysname-Async6/4/0]
interface serial
Use interface serial to enter serial interface view or serial sub interface view. Before you enter serial sub
interface view, if the specified sub interface does not exist, the command creates the sub interface and
enters its view.
Syntax
interface serial interface-number
Default
No serial sub interface exists.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a serial interface by its number.
Examples
# Create serial interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0]
Related commands
link-protocol
invert receive-clock
Use invert receive-clock to invert the receive-clock signal on the DTE-side synchronous serial interface.
Use undo invert receive-clock to restore the default.
Syntax
invert receive-clock
undo invert receive-clock