HP MSR2000/3000/4000 Router Series Interface Command Reference

67
Usage guidelines
When you collect traffic statistics for a specific period of time on an interface, clear the existing statistics
on the interface first.
• If you do not specify the async keyword, this command clears statistics on all interfaces.
• If you specify the async keyword without the interface-number argument, this command clears
statistics on all asynchronous interfaces.
• If you specify both the async keyword and the interface-number argument, this command clears
statistics on a specified asynchronous interface.
Examples
# Clear statistics on interface Async 6/4/0.
<Sysname> reset counters interface async 6/4/0
Related commands
display interface async
reverse-rts
Use reverse-rts to reverse RTS signal in synchronous mode for debugging purpose.
Use undo reverse-rts to restore the default.
Syntax
reverse-rts
undo reverse-rts
Default
RTS signal reverse is disabled.
Views
Synchronous serial interface view
Predefined user roles
network-admin
Usage guidelines
This command is used in hardware flow control where the remote is not allowed to send data when the
local end is doing that.
Examples
# Reverse the RTS signal.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] reverse-rts
virtualbaudrate
Use virtualbaudrate to set a virtual baud rate for the DTE-side interface.
Use undo virtualbaudrate to remove the specified virtual baud rate.